Cartridges
Data about products are informative - for current version of technical data or manuals consult us.
Kuzma CAR cartridges are made to our specifications by a Japanese company with over 50 years experience in this field. The same approach, with regard to design and manufacture of cartridges housings is used as in other Kuzma products. A combination of brass and aluminium parts made by us gives rigid and inert support to the signal generator, allowing the diamond tip to extract musical information from the record grooves without distortion.
For CAR cartridges 5 years extended warranty do not apply!
Type
Cartridge housing
Coil Wire
Cantilever Material
Stylus
Frequency Response
Output Voltage (3.54 cm/1 kHz)
Channel Balance (1 kHz)
Channel Separation (1 kHz)
Tracking Force
Compliance
Trackability
Internal Impedance
Load Impedance
Net Weight
Moving Coil
aluminium/brass
STD Copper
Aluminium
Synthetic Elliptical
10 Hz - 33 kHz
0.3 mV
<1 dB
>23 dB
2.0 g
8 x 10-6 cm/dyne
>70 μm/2.0 g
4 Ω
<100 Ω
17 g
High output MC
aluminium/brass
STD Copper
Aluminium
Synthetic Elliptical
10 Hz - 33 kHz
2 mV
<1.5 dB
>21 dB
2.0 g
8 x 10-6 cm/dyne
>60 μm/2.0 g
130 Ω
47 kΩ
17 g
Moving Coil
aluminium/brass
5N Copper
Boron
Microridge
10 Hz - 35 kHz
0.3 mV
<1 dB
>25 dB
2.0 g
10 x 10-6 cm/dyne
>70 μm/2.0 g
4 Ω
<100 Ω
17 g
Moving Coil
aluminium/brass
4N Silver
Boron
Microridge
10 Hz - 40 kHz
0.3 mV
<1 dB
> 30 dB
2.0 g
10 x 10-6 cm/dyne
>70 μm/2.0 g
6 Ω
<100 Ω
17 g
Moving Coil
aluminium/brass
4N Silver
Sapphire
Microridge
10 Hz - 45 kHz
0.3 mV
<0.5 dB
>30 dB
2.0 g
10 x 10-6 cm/dyne
>70 μm/2.0 g
6 Ω
<100 Ω
17 g
Moving Coil
aluminium/brass
4N Silver
Diamond
Microridge
10 Hz - 45 kHz
0.3 mV
<0.5 dB
>30 dB
2.0 g
10 x 10-6 cm/dyne
>70 μm/2.0 g
6 Ω
<100 Ω
17 g
Moving Coil
sapphire
4N Silver wire
Diamond with diamond tip in one piece
Microridge
10 Hz- 45 kHz
0,3 mV 3,54 cm/ 1 kHz
< 1,0 dB 1 kHz
> 30 dB 1 kHz
2,1 g
10 x10-6 cm/dyne
> 70 micron
6 Ohm
> 100 Ohm
17 g
